首页 > Ultra InTeLi Strobe - Performance 1
|
．产品型号:
|
UIS-P1
|
|
．售价:
|
|
|
．数量:
|
* 售罄
Checking inventory...
|
|
|
|
|
加入购物车
直接结帐
+ 加入愿望购物表
|
|
|
|
MODEL NUMBER AOI UIS-P1
DESCRIPTION Ultra InTeLi Strobe - Performance 1
MAIN BODY COLOR Silver
MAIN BODY MATERIAL PC + GF, Alluminum Alloy With Hard Anodization
DEPTH RATING 100 Meters
STROBE Energy 150 Ws
Beam Angle 150 Deg.
Color Temperature 5,900K
Flash Recycle Time 1.8 sec. Full Power with 5,300mAh, 20A, Li-ion Battery
Number of Flashes 540
Flash Sync.Cord Fiber Optic
Pre-flash Sync. ON / OFF Setting
Flash Test Button Yes
Flash Modes RC / TTL Mode
OM System Cameras:RC FLASH (TTL AUTO, MANUAL,FP TTL AUTO, FP MANUAL)
CH 1, 2, 3, 4, Group A, B, C
Sony Cameras:TTL, TTL-HSS
i-Macro Mode
M Mode
Manual / M-HSS Setting:1/32+0.5, 1/16, 1/16+0.5, 1/8,
1/8+0.5, 1/4, 1/4+0.5, 1/2, 1/2+0.5 & 1/1
COB LIGHT Maximum Output Measured
On Land with Standard Diffusor 3000 Lumens Color Temperature 4500K
Beam Angle 100 Deg.
Power Control Off, 100%, 50%, 25%
Flash Auto Shut-off Yes
Burn Time 60 Minutes (Using COB Light Only, Max. Brightness and with 5,000 mAh, Li-ion Batteries)
BATTERY REQUIREMENTS 21700 Li-ion Rechargeable Battery x 2pcs (Batt Not Included In Product)
Output Current Min. 15A
Capacity Min. 5,000 mAH
Battery Protection PCB Required
MOUNTING Ball Mount
DIMENSIONS 205mm (L) X 91mm (W) X 133.5mm (H)
WEIGHT On Land Approx. 1,180 g (w / Batt)
Underwater Approx. 230 g (w / Batt)
STANDARD ACCESSORIES Standard Diffusor Strobe x1pc., Diffusor Lanyard x1pc.,
Ball Mount x1pc., Allen Key x1pc.,
Spare Battery Cap Seal-ring x2pcs, Control Knob Extension x1pc.,
O-Ring Remover (AOI ORR-02) x1pc.,
Silicone Grease (AOI SIGR-2) x1pc., Battery Storage Case x1pc.