| MODEL NUMBER | AOI UIS-P1 |
| DESCRIPTION | Ultra InTeLi Strobe - Performance 1 |
| MAIN BODY COLOR | Silver |
| MAIN BODY MATERIAL | PC + GF, Alluminum Alloy With Hard Anodization |
| DEPTH RATING | 100 Meters |
| STROBE | Energy | 150 Ws |
| Beam Angle | 150 Deg. |
| Color Temperature | 5,900K |
| Flash Recycle Time | 1.8 sec. | Full Power with 5,300mAh, 20A, Li-ion Battery |
| Number of Flashes | 540 |
| Flash Sync.Cord | Fiber Optic |
| Pre-flash Sync. | ON / OFF Setting |
| Flash Test Button | Yes |
| Flash Modes | RC / TTL
Mode | OM System Cameras:RC FLASH (TTL AUTO, MANUAL, FP TTL AUTO, FP MANUAL) CH 1, 2, 3, 4, Group A, B, C Sony Cameras:TTL, TTL-HSS |
| i-Macro Mode |
| M Mode | Manual / M-HSS Setting:1/32+0.5, 1/16, 1/16+0.5, 1/8, 1/8+0.5, 1/4, 1/4+0.5, 1/2, 1/2+0.5 & 1/1 |
| COB LIGHT | Maximum Output | Measured
On Land with
Standard Diffusor | 3000 Lumens |
| Color Temperature | 4500K |
| Beam Angle | 100 Deg. |
| Power Control | Off, 100%, 50%, 25% |
| Flash Auto Shut-off | Yes |
| Burn Time | 60 Minutes (Using COB Light Only, Max. Brightness and with 5,000 mAh, Li-ion Batteries) |
| BATTERY REQUIREMENTS | 21700 Li-ion Rechargeable Battery x 2pcs (Batt Not Included In Product) |
| Output Current | Min. 15A |
| Capacity | Min. 5,000 mAH |
| Battery Protection PCB | Required |
| MOUNTING | Ball Mount |
| DIMENSIONS | 205mm (L) X 91mm (W) X 133.5mm (H) |
| WEIGHT | On Land | Approx. 1,180 g (w / Batt) |
| Underwater | Approx. 230 g (w / Batt) |
| STANDARD ACCESSORIES | Standard Diffusor Strobe x1pc., Diffusor Lanyard x1pc., |
| Ball Mount x1pc., Allen Key x1pc., |
| Spare Battery Cap Seal-ring x2pcs, Control Knob Extension x1pc., |
| O-Ring Remover (AOI ORR-02) x1pc., |
| Silicone Grease (AOI SIGR-2) x1pc., Battery Storage Case x1pc. |
