INON-INON UW TRIPOD HUB

A robust aluminum-alloy underwater tripod built to withstand heavy use. Compatible with “Carbon Telescopic Arm SS/S/M/L bodies” and “Stick Arm XS-T/SS-T/S-T/M-T bodies” used as legs. Versatile enough to serve as either a compact underwater tripod or a full-scale large tripod, reaching a total height of 1,185 mm / 46.7 inch for serious photography.

Camera mount : 1/4-20UNC thread

The built-in stopper prevents the legs from accidentally opening. The leg spread angle can be adjusted to three positions: “Standard,” “Medium,” and “Low.” The friction when switching angles can be adjusted by tightening the bolts that secure the hub body to the leg joints.

Features a split-structure elevator mechanism. By removing the lower elevator section in low-position mode, the camera can be set closer to the ground. The included “lower elevator” can also be connected to an optional “lower elevator” (sold separately).

Each lower elevator section adds 145 mm / 5.7 inch to the total height. Mounting the elevator upside down enables low-angle shooting or positioning the camera directly beneath the tripod.

Includes a switchable rubber/spike “2-Way Ferrule.” Simply screw it onto the arm ball. Rotating the rubber reveals the spike, allowing different setups depending on the shooting environment.

To enhance tripod stability, you can hang a weight from the strap hole or attach an INON “Weight Plate” to the arm ball of a tripod leg.

Various head units can be attached to the top to meet your shooting needs.

Arm usable as a tripod leg

• Stick Arm XS-T/SS-T/S-T/M-T
• Carbon Telescopic Arm SS/S/M/L

Camera mount compatible products

• UW 3-Way Panhead
• Quick Shoe Ball Head UWTP-QB1
• Ball Head UWTP-B1
• M6 Ball Head UWTP-M6B1
• Single Light Holder LE for Tripod
• Single Light Holder LF for Tripod
• Tripod Adapter
• Mount Adapter for ZD/SD Front Mask
• GP 1/4-20UNC Adapter II
• BALL 1/4-20UNC Adapter
• An underwater housing equipped with "1/4-20UNC" tripod screw hole (screw hole depth 5mm or deeper).

Combined Arms	Maximum Operating Height	Maximum Operating Height with Elevator Down	Minimum Operating Height	Folded Length
UW Tripod Hub	UW Tripod Hub + UW 3-Way Panhead	UW Tripod Hub	UW Tripod Hub + UW 3-Way Panhead	UW Tripod Hub	UW Tripod Hub + UW 3-Way Panhead	UW Tripod Hub	UW Tripod Hub + UW 3-Way Panhead
Stick Arm XS-T	320mm 1.1ft	405mm 1.1ft	175mm 7in (*)	260mm 10in (*)	55mm 2in	140mm 6in	190mm 7in	275mm 11in
Stick Arm SS-T	360mm 1.2ft	445mm 1.5ft	220mm 9ft	305mm 1ft	65mm 3in	150mm 6in	235mm 9in	320mm 1.1ft
Stick Arm S-T	390mm 1.3ft	475mm 1.6ft	245mm 10in	330mm 1.1ft	70mm 3in	155mm 6in	265mm 10in	350mm 1.1ft
Stick Arm M-T	435mm 1.4ft	520mm 1.7ft	290mm 11in	375mm 1.2ft	80mm 3in	165mm 6in	320mm 1.1ft	405mm 1.3ft
Carbon Telescopic Arm SS	500mm 1.6ft	585mm 1.9ft	355mm 1.2ft	440mm 1.4ft	75mm 3in	160mm 6in	310mm 1.1ft	395mm 1.3ft
Carbon Telescopic Arm S	700mm 2.3ft	785mm 2.6ft	555mm 1.8ft	640mm 2.1ft	85mm 3in	170mm 7in	380mm 1.3ft	465mm 1.5ft
Carbon Telescopic Arm M	945mm 3.1ft	1,030mm 3.4ft	800mm 2.6ft	885mm 2.9ft	100mm 4in	185mm 7in	470mm 1.5ft	555mm 1.8ft
Carbon Telescopic Arm L	1,185mm 3.9ft	1,270mm 4.2ft	1,040mm 3.4ft	1,125mm 3.7ft	115mm 5in	200mm 8in	560mm 1.8ft	645mm 2.1ft

Maximum Operating Height : The height to camera plate with tripod legs fully extended (when using Carbon Telescopic Arms), opening angle set to "High" and elevator raised to its highest position.

Maximum Operating Height with Elevator Down : The height to camera plate with same conditions above except position of the elevator which is set to its lowest position.

Minimum Operating Height : The height to camera plate with opening angle set to "Low".

Folded Length : Overall length when all tripod legs collapsed for transporting or storage. 

(*)Without Lower Elevator being attached as it will conflict with the ground.